Analogue Addressable

HCP-E Addressable call point, flush, red (no back box)

HCP-DPS Addressable call point, flush, red, dual pole (no back box)

HCP-W Addressable call point, red, weatherproof c/w back box

Addressable Sounder Base with isolator, white (Discovery) (Can be used as part of sounder/detector base combination - requires a separately available smoke/heat detector & base, spur wires & fixing screws provided

Addressable Sounder Beacon Base with isolator, white (Discovery) (Can be used as part of sounder/beacon/detector base combination - requires a separately available smoke/heat detector & base, spur wires & fixing screws provided)

Addressable Wall Beacon with isolator, deep base, red (Discovery)

Addressable Wall Beacon with isolator, shallow base, red (Discovery)

Addressable Wall Sounder with isolator, deep base, red (Discovery)

Addressable Wall Sounder with isolator, shallow base, red (Discovery)

Addressable Wall Sounder/Beacon with isolator, deep base, red (Discovery)

Addressable Wall Sounder/Beacon with isolator, shallow base, red (Discovery)

45681-276 ancillary base sounder

45681-333 beacon base with isolator

8531-771 blank XPERT card

58000-300 carbon monoxide fire detector, no base

Model CHQ-SZM(SCI) is a Single Zone Monitor designed to allow up to 6 conventional detectors to be interfaced to Hochiki’s ESP analogue addressable system.

SI/CAP Cover for BF330HE, BF330HEB, BF308HEI sounder/isolators

Model DCD-CE3(WHT) is a Rate of Rise Heat Detector with a 90 °C fixed temperature element using a thermistor and linearising circuit to provide an accurate linear response Heat Detector.

CHQ-R/DIN DIN rail mounting dual relay controller (J type)

CHQ-S/DIN DIN rail mounting dual switch monitor (J type

CHQ-MZ/DIN DIN rail mounting mini zone monitor (J type)

CHQ-SCI/DIN DIN rail mounting short circuit isolator

CHQ-SCI/DIN DIN rail mounting short circuit isolator (J type)

CHQ-DIM Dual input monitor c/w isolator , loop powered (needs AFP750B)

55000-802 dual isolator, DIN style

CHQ-DRC Dual relay controller c/w isolator , loop powered (needs AFP750B

CHQ-DSC Dual sounder controller c/w isolator requires 24VDC supply (needs AFP750B)

CHQ-Z Dual zone monitor , requires 24VDC supply (needs AFP750LB)

CHQ-ADAPTOR ESP CHQ adapter

14009 External directional aerial

14008 External standard aerial

ACB-E Fixed temperature/ROR heat sensor , no base

ACB-E/W Fixed temperature/ROR heat sensor , weatherproof, no base

58000-920 flush mounting manual call point c/w terminal tray

TCH-B100 Hand held address programmer

58000-400 heat detector, no base

55000-400 standard temperature (55ºC) heat detector, no base

55000-401 high temperature (90ºC) heat detector, no base

11170 A1R heat detector with radio base/address module

55000-181 hi-power sounder control unit, DIN style

Model ACB-E is a Multi-Heat Sensor, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol.

Model ACB-E(WHT) is a Multi-Heat Sensor, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol

The CHQ-AB(AMB) is an of addressable loop-powered Beacon, with high-intensity LEDs and a Fresnel lens design which produces a highly visible flash.

The CHQ-AB(AMB)WHT is an addressable loop-powered Beacon, with high-intensity LEDs and a Fresnel lens design which produces a highly visible flash.

The CHQ-AB(BLU) is an addressable loop-powered Beacon, with high-intensity LEDs and a Fresnel lens design which produces a highly visible flash.

The CHQ-AB(WHT) is an addressable loop-powered Beacon, with high-intensity LEDs and a Fresnel lens design which produces a highly visible flash.

The CHQ-ARI is a loop-powered Addressable Remote Indicator, with high-intensity LEDs and a Fresnel lens design which produces a highly visible signal.

The CHQ-ARI(WHT) is a loop-powered Addressable Remote Indicator, with high-intensity LEDs and a Fresnel lens design which produces a highly visible signal.

Model CHQ-SZM/M(SCI) is a Marine Approved Single Zone Monitor designed to allow up to 6 marine approved conventional detectors to be interfaced to Hochiki’s ESP analogue addressable system

Model SLR-E-IS is a Photoelectric Smoke Detector designed for use in hazardous areas which also incorporates a remote indicator output and a removable chamber for easy maintenance.