Convention fire panels

BF360-12 12V 2A EN54-4/A2 Boxed PSU (380 x 235 x 96mm plastic

BF360-12/E 12V 2A EN54-4/A2 Caged Power Supply. Batteries:

BF360-12/C 12V 2A EN54-4/A2 Power Supply PCB Only. Batteries:

BF368EN 24 3A EN54-4 Boxed PSU (410 x 250 x 80mm enclosure)

BF362-1 24V 1.5A EN54-4/A2 Boxed PSU (404 x 404 x 110mm

BF360-24 24V 1.5A EN54-4/A2 Boxed PSU (380 x 235 x 96mm

BF360-24/E 24V 1.5A EN54-4/A2 Caged Power Supply.Batteries:

BF360-24/C 24V 1.5A EN54-4/A2 Power Supply PCB Only. Batt

BF361-3 24V 3A EN54-4/A2 Boxed PSU (465 x 290 x 103mm enc

BF362-3 24V 3A EN54-4/A2 Boxed PSU (404 x 404 x 110mm metal

BF362-3/E 24V 3A EN54-4/A2 Caged Power Supply. Batteries:

BF362-3/C 24V 3A EN54-4/A2 Power Supply PCB Only. Batteries:

BF362-5 24V 5A EN54-4/A2 Boxed PSU (404 x 404 x 110mm metal

BF361-5 24V 5A EN54-4/A2 Boxed PSU (465 x 290 x 103mm enc

BF362-5/E 24V 5A EN54-4/A2 Caged Power Supply. Batteries:

BF362-5/C 24V 5A EN54-4/A2 Power Supply PCB Only. Batteries:

c/w 3A EN54-4 PSU (Max. 2 x 7.0Ah batteries) ?LPCB certified to EN12094-1 and EN54-2/4 (no. 176c)

allows an MFP zone circuit to be connected to up to 10 intrinsically safe detectors and call points via a Zenner barrier, not supplied)

Barrier interface unit (allows an MFP zone circuit to be connected to up to 10 intrinsically safe detectors and call points via a Zenner barrier, not supplied)

Bezel for FP2/FP4E

MFP20 / MFP24 / MFP28

Bezel for MFP16 / MFP20 / MFP24 / MFP28

MFP8 / MFP12 / MFP Repeaters

Bezel for MFP4 / MFP8 / MFP12 / MFP Repeaters

Key CFP702-4 features: LPCB certified to the latest versions of EN54 Parts 2 and 4 Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry to access level 2

Key CFP708-4 features: •LPCB certified to the latest versions of EN54 Parts 2 and 4 •Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry to access level 2

CFP Economy 2 zone panel, keypad/keyswitch entry (Max. 2 x 3.4Ah batteries)

CFP Economy 4 zone panel, keypad/keyswitch entry (Max. 2 x 3.4Ah batteries)

CFP Economy 8 zone panel, keypad/keyswitch entry (Max. 2 x 3.4Ah batteries)

CFP network driver card, one required per repeater system, fit at main

CFP relay output per zone card, as CFP762 plus 8 output per zone relays

CFP Standard 2 zone panel, keypad/keyswitch entry (Max. 2 x 3.4Ah batteries)

CFP Standard 8 zone panel, keypad/keyswitch entry (Max. 2 x 3.4Ah batteries)

single gang c/w keyswitch operated mode (auto/manual) switch and Status LEDs. Max. 8 per EP203

EFP1 single zone panel, does not extend (Max. 2 x 2.3Ah batteries)

EFPX expansion loom and terminals for EFP1

Electronic Monitoring Unit

single gang, IP66 rated. Can be used to delay or cancel the release sequence depending on how it is connected

Requires 2 x 12V 3.2Ah Sealed Lead Acid Batteries.

Requires 2 x 12V 3.2Ah Sealed Lead Acid Batteries

Requires 2 x 12V 3.2Ah Sealed Lead Acid Batteries

Key Features: •Compatible with all Twinflex Pro control panels •Reports Twinflex Pro panel events to a remote location •Capable of performing system controls (i.e. Silence Alarms, Reset, Sound Alarms & Silence Buzzer) •Maximum of 8 repeater panels can be connected to a single control panel

Relay interfacing module with monitored input to provide shutdown and monitoring facilties from the Twinflex zone

FP 10 zone repeater panel (no batteries required)

FP 2 zone extender pcb kit, use to extend FP panels

FP 20 zone repeater panel (no batteries required)

FP auto extinguisher panel

FP auto extinguisher panel

FP fault relay module

FP fire relay module