Disabled Refuge Systems

2-way Line Card for Type A Fire Telephone Outstations One card required per two Type A outstations connected to a CCU or SCU

4 Line Master EVC controller c/w handset & display, needs 2 x 7Ah batteries

8 Line Master EVC control unit c/w line cards, handset and display Wall-mounting, needs 2 x 7.0Ah batteries

8 Line Master EVC control unit (no handset) c/w line cards and display Wall-mounting, needs 2 x 7.0Ah batteries (typically used on networked systems that do not require multiple control points)

8 Line Slave EVC expansion unit (expands ECU-8/ECU-8NT to 16 lines) Wall-mounting, max. one ECU-8S per ECU-8/ECU-8NT , no batteries required

Adaptor box to convert fire-rated cable to Cat 5

Amber xenon strobe, 12V

24V 7.0 AH VRLA battery pack (2 x 12V including link wire)

Blue xenon strobe, 12V

Cam lock kit for BF359/3D stainless steel enclosure

Custom message card for CCU (optional)

128 line Desk control unit with handset and display

32 line Desk control unit with handset and display

64 line Desk control unit with handset and display

Electromagnetic solenoid lock kit for BF359/3S

16 line master EVC control unit with display, wall-mounting Needs a separate ECU desk dial unit, LC2/LC3 line cards and 2 x 7.0Ah batteries

16 line slave EVC expansion unit (expands CCU-16 in 16 line multiples) Wall-mounting, needs LC2/LC3 line cards and 2 x 7.0Ah batteries Max. seven SCU-16 slaves per CCU-16 master (allows up to 128 lines)

EVC line tester

Flush mounting bezel for BF359/2 enclosure

Green handsfree EVC outstation, flush mounting

Green handsfree EVC outstation, surface mounting

Grey flush bezel for ECU-8 controllers

Grey steel anti-tamper enclosure for ECU-8 controllers, surface mounting

Network communication card (allows up to four ECU-8 or ECU-8NT controllers to be interlinked - one required per networked ECU-8 or ECU-8NT)

PC programming software, configurator and mini-USB lead for ECU-4 / ECU-8 (allows the optional programming of extension names etc via a Windows PC)

Red fire telephone EVC outstation, c/w handset (lift lock version

Red fire telephone EVC outstation, c/w handset (push to open version)

Red flush bezel for EVC301RPO & EVC301RLK

Stainless steel anti-tamper enclosure for ECU-8 controllers, flush mounting

Stainless steel handsfree EVC outstation, flush mounting

Strobe driver module, 12V

Two message card for CCU (optional)

Wall Mount Bracket for ECU-32, ECU-64, ECU-128

Weatherproof enclosure, IP66, steel, non-locking (for EVC302F/EVC302GF)