Fire Accessories & Bases

Tool to remove the optical chamber of Multipoint detectors, the lense of Flash Point beacons and the main body of the Hatari range.

A cover flap that can be fitted to Fike's manual call point range in order to reduce the risk of accidental operation.

A multifunction LED for connection to most common detectors.

Deep back box suitable for surface mount cable termination of cables with trunking, conduit or glands.

Replacement chamber cover for addressable ALG smoke sensors and SLR conventional smoke detectors.

The CHQ-BACKBOX is designed for installations where the CHQ Range of Modules

The CHQ-ADAPTOR is designed to allow the “Smart-Fix“ range of CHQ Modules to be housed in existing enclosures originally designed for the first generation CHQ-OEM Modules by modifying the ‘footprint’ of the unit.

An alternative lid for the CHQ Range of modules, manufactured in solid white ABS this lid can replace the semi-transparent black lid which is supplied as standard with the module.

Model CHQ-DIM/DIN(SCI) is a Dual Input Module designed to interface to a variety of inputs such as door contacts, sprinkler flow/door switches and plant equipment

Model CHQ-DIM/M(SCI) is a Marine Approved Dual Input Module designed to interface to a variety of inputs such as door contacts, sprinkler flow/door switches and plant equipment.

Model CHQ-DRC/DIN(SCI) is a Dual Relay Controller designed to provide two general-purpose relay outputs

Model CHQ-DSC(SCI) is a Dual Sounder Controller, which has been designed to provide two sounder outputs (that can be driven separately) with full fault monitoring

Model CHQ-DSC/M(SCI) is a Marine Approved Dual Sounder Controller, which has been designed to provide two sounder outputs (that can be driven separately) with full fault monitoring

Model CHQ-DZM(SCI) is a Dual Circuit Zone Controller designed to allow up to 60 conventional detectors (30 on each zone) to be interfaced to Hochiki’s ESP analogue addressable system

Model CHQ-DZM(SCI)-IS is Dual Zone Module which is fully compatible with Hochiki's ESP analogue addressable protocol and I.S. equipment

Model CHQ-DZM/DIN(SCI) is a Dual Circuit Zone Controller designed to allow up to 60 conventional detectors (30 on each zone) to be interfaced to Hochiki’s ESP analogue addressable system.

Model CHQ-DZM/DIN(SCI)-IS is Dual Zone Module which is fully compatible with Hochiki's ESP analogue addressable protocol and I.S. equipment.

Model CHQ-MRC/DIN(SCI) is a Single Input/Output Module, which provides a single, mains-rated relay output for the control of such devices as dampers, extractors or plant and equipment shutdown

The CHQ-PCM(SCI) is a loop powered input/output module with four independent change-over relay outputs and four monitored inputs.

The CHQ-PCM/DIN(SCI) is a loop powered input/output module with four independent change-over relay outputs and four monitored inputs.

Model CHQ-POM is a powered-output module designed to supply 24 V dc at various, user-selectable current levels from 2 to 32 mA (in increments of 2 mA).

The CHQ-SIM has been designed to allow a single monitored input to be connected to the ESP loop.

The CHQ-SOM has been designed to allow a single relay output to be connected to the ESP loop.

Model CHQ-SZM/DIN(SCI) is a Single Zone Monitor designed to allow up to 6 conventional detectors to be interfaced to Hochiki’s ESP analogue addressable system.

CO capsules for use with the Testifire 1000 and 2000 detector tester heads. Produces safe amounts of CO for testing CO detectors in-situ.

The CSB-E is platform type sounder, which will accept the CDX Range of detectors mounted with an appropriate base

The CSB-E(WHT) is platform type sounder, which will accept the CDX Range of detectors mounted with an appropriate base

The CSBB-E is platform type sounder beacon, which will accept the CDX Range of detectors mounted with an appropriate base

The CSBB-E(WHT) is platform type sounder beacon, which will accept the CDX Range of detectors mounted with an appropriate base.The improved electronics result in a very low current consumption with a high sound output.

Model DH-24 is an electromagnetic door retainer which ensures retention of the door by means of a smart metallic keeper plate.

The FB-1 (FIREbeam) is a reflective beam Smoke Detector which features advanced motorised technology allowing it to self-align itself to the centre of the reflector when commissioning

The FB-AK Anti-Fog Kit has been developed to overcome the problems of condensation, this special kit contains a reflector and lens cover that have been treated with a Nano technology finish that will not mist over. The anti-fog reflector is also available individually

The FB-ARS is a specially treated short-range reflector for the FB-1 FIREbeam detector. Its surface is treated with a Nano technology finish that will not mist over. ideal for high-condensation areas.

The FB-B Mounting Bracket has been specially designed to allow either the esp FIREbeam detector head or the reflector to be mounted and angled with a ball-socket which allows universal adjustment.

The FB-UA Unistrut Adapter has been specially designed to screw to the back of the ESP FIREbeam detector, this adapter allows you to easily use Unistrut fixing systems.

An addressable protocol interface card used to decode and relay FIRElink detector information directly to an Hochiki ESP compliant fire control panel.

A steel wall mounting bracket specifically designed for the IFD Range of IR³ detectors. Adjustable through horizontal and vertical planes.

The approved design of the MBB-1 provides a splash-proof, secure fixing for the Hochiki CDX and ESP Marine Approved Range of Detectors and their associated Bases.

The approved design of the MBB-1(WHT) provides a splash-proof, dust-proof, secure fixing for the Hochiki CDX and ESP range of detectors and their associated Bases

Model MTL5561 is a zone-powered, two-channel interface for use in conventional fire detection systems for protection within hazardous areas.

Model MTL7728+ is an intrinsically safe, zone-powered, Zener-diode barrier for use in conventional fire detection systems for protection within hazardous areas.

Model MTL7787+ is an intrinsically safe, zone-powered, Zener-diode barrier for use in conventional fire detection systems for protection within hazardous areas.

The design of the SBB-1 provides a dust-proof and secure fixing for the Hochiki CDX and ESP Range of Detectors and Sensors, and their associated Bases

The SDP-2 is a Duct Probe housing allowing a standard photoelectric smoke detection device, either a conventional detector or an analogue sensor, to be mounted on the outside of an air duct for the purpose of monitoring the air within the duct.