Induction Loop Systems

100V line (i.e PA system output) to 0db (775mV line level) convertor

3.5mm jack to 1/4” jack socket

3.5mm jack to 3.5mm jack lead (connects PNGN to APJ outreach plate)

3.5mm jack to double phono lead (connects PNGN to APL outreach plate or DL50)

3.5mm jack to pre-cut bare ended lead

5.35mm jack to XLRM lead

AFILS active indicator light

Desktop microphone for ML1, PDA102, PDA200E, PL1, PDA Pro-Range or APJ plate

Desktop microphone, push to talk

Desktop microphone (short stemmed version of AMD)

FosMeter-Pro Induction Loop Test Kit Includes FosMeter-Pro Induction Loop Tester , MP3 player c/w test tones & headphones Requires AL1, AL2, AL3 or AL12 connection lead

10m Belden 8723 four core screened cable for use with outreach plates

25m Belden 8723 four core screened cable for use with outreach plates

Handheld microphone for ML1, PDA102, PDA200E, PL1, PDA Pro-Range or APJ plate

Handheld radio mic. (173.8 KHz) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate

Hanging ambient microphone for PDA Pro-Range or APXM plate

Pack of 10 self-adhesive ‘induction loop fitted’ stickers

Induction loop test receiver requires 2 x AAA batteries & walkman type headphones

100m x 0.5mm2 insulated copper tape (flat loop cable for under carpets)

100m x 1.0 mm2 insulated copper tape (flat loop cable for under carpets

100m x 1.5mm2 insulated copper tape (flat loop cable for under carpets)

Lavalier radio mic. (4 selectable frequencies) c/w Rx, Tx, psu. for PDA200E or APQM outreach plate

Lectern microphone for ML1, PDA102, PDA200E, PL1, PDA Pro-Range or APJ plate

Lectern microphone (short stemmed version of AML)

Loop connector plate (for the termination of induction loop cable)

Omni-directional plated microphone, for wall/ceiling/desk mounting

SCART to double phono lead (for use with APL plate)

100m x 0.5mm2 single core white loop cable (for black cable order LOOP1/B)

100m x 1.5mm2 single core white loop cable (for black cable order LOOP3/B)

100m x 2.5mm2 single core white loop cable (for black cable order LOOP4/B)

3 pin XLR balanced line output plate, connects an Outreach chain to 3rd-party equipment

XLR to XLR lead (used to connect AMP mic to APXM outreach plate)