Voice Alarm Systems

20W pendant loudspeaker c/w 8m cable and internal stress wire (requires VA490 or VA492)

5 Zone self-cancelling paging microphone console (non-life safety), needs PAZU10

6” 6W ceiling speaker c/w steel fire dome & ceramic terminal block

6W round wall/ceiling speaker in metal cabinet c/w ceramic terminal block

8W wall mounting bi-directional metal speaker c/w ceramic terminal block

8W wall mounting metal cabinet speaker c/w ceramic terminal block

Ceramic terminal block and thermal fuse assembly (use to convert wire-end sealers to BS 5839-8, needs adaptable back box)

Custom recording session, up to 5 messages (English language, male or female voice, neutral accent - includes message treatment, encoding etc.)

FM1 Emergency microphone (1 only per system)

FMIC Emergency microphone (up to 4 only per system)

The stand alone Hatari sounder can be utilised where extra sound output on the zone is a requirement, or for areas that do not require automatic detection technology.

The stand alone Hatari sounder can be utilised where extra sound output on the zone is a requirement, or for areas that do not require automatic detection technology.

The Fike Twinflex Flashpoint allows a simple and effective visual indication directly from the 2-wire zone, complete with a sounder.

Stand alone sounder and LED visual indication beacon with 90dB output, three sound patterns and inbuilt ‘End of Line’ set by DIL switch. Supplied complete with mounting base.

The Twinflex soundpoint is designed to comply with the European standard EN54 part 3. The back box is common with the Fike callpoint and can be fitted at the time of installation with other first fix items

The Twinflex soundpoint is designed to comply with the European standard EN54 part 3. The back box is common with the Fike callpoint and can be fitted at the time of installation with other first fix items

Model CHQ-WS2 is an addressable loop powered Wall Sounder innovatively designed to provide a range of tones and volumes with a maximum output of up to 102dB(A) (±2dB(A)) with low current consumption

Model CHQ-WS2(WHT) is an addressable loop powered Wall Sounder innovatively designed to provide a range of tones and volumes with a maximum output of up to 102dB(A) (±2dB(A)) with low current consumption

Model CLB-E is a conventional Beacon for use on 24 V Sounder Circuits.

Model CLB-E(WHT) is a conventional Beacon for use on 24 V Sounder Circuits.

This six-inch diameter bell unit has the same operation as the MBF-6EV except it comes equipped with a weatherproof back box enabling it to be used externally

The MBF-6EV is a six-inch diameter internal use Conventional Alarm Bell based upon the industry standard KOBELL range.

SPE045 Line level paging microphone (up to 4 only per system)

VA loudspeaker metal termination box c/w 2 x ceramic terminal blocks and thermal fuses

Master AVAC dual 60W amplifier, charger & PSU includes fire alarm interface, emergency microphone, paging and BGM connections

Master AVAC dual 60W amplifier , charger & PSU c/w ‘hotswap’ standby amp. includes fire alarm interface, emergency microphone, paging and BGM connections

Slave AVAC dual 60W amplifier, charger & PSU includes local paging and BGM connections

Slave AVAC dual 60W amplifier , charger & PSU c/w ‘hotswap’ standby amp. includes local paging and BGM connections

SPE119 Wall-mounted 10-zone microphone switching unit with PSU for use with up to 8 PA105 or PA110s